Install and charge

Step 1: Install and charge

The battery provided is designed specifically for your Tyro Pro Lite EFTPOS machine. If the battery is not inserted already:

• Before plugging in your machine, turn your machine over and unclip the battery door by pushing the clips as shown in the picture below.
• Find the battery pack included in the box and place in the back of the machine
• Attach the battery door.

We recommend fully charging the battery before first use. The battery charges each time the power adapter is connected.

To charge your battery:

• Connect the power adapter provided to the machine USB type-C connector.
• Connect the power adapter to the power supply.
• The battery icon on the top of the screen will show that it is charging.

Step 2: Insert a paper roll

The Tyro Pro Lite EFTPOS machine uses the same paper rolls as the Tyro Mobile EFTPOS machines. NOTE: Unapproved paper rolls may damage the printer. Paper rolls can be purchased via the Tyro App or Tyro Portal.

To insert a paper roll:

• Open the paper cover by lifting the catch located at the top of your EFTPOS machine and pull the cover down towards the back of the machine.
• Insert the paper roll following the picture below.
• Pull the paper so that you can see the receipt paper when you clip the cover into position.

Advice: when inserting a new paper roll, tear off the first length to avoid printing on the adhesive area.